...
1300 364 858

Clean Water Tank Instructions

CONGRATULATIONS!

Your rainwater tanks have been cleaned and sanitised by a Pristine Water Systems Water Technician.

 

To ensure your water supply is optimally sanitised, please watch this video:

Your rainwater tanks have been cleaned and sanitised by a Pristine Water Systems Water Technician. To ensure your water supply is optimally sanitised, please watch this video

POST TREATMENT INSTRUCTIONS

A step by step guide on how to complete your water tank service.

Day of Service – Confirm AqueousPro™ 50 is Effective

STEP ONE: TURN ON ALL YOUR TAPS

Open all internal and external water outlets (taps, showers, sinks, etc) and run for a few minutes* to draw freshly sanitised water from the water tank, through your pump and into all pipework throughout the property.

*NB: Tap run times may vary depending on distance water travels from tank to tap.

STEP TWO: USE TEST STRIPS PROVIDED

Confirm Sanitised Water. Dip one test strip into the water sample for approx. 2 seconds and remove. Wait 30 seconds. Hold test strip next to colour match chart below, then read your results.

STEP THREE: CONFIRM PPM

Ensure that colour concentration is between 10 ppm and 25 ppm to confirm sanitised water is present within the pipework of your water supply system.

Allow adequate contact time for optimal sanitisation

AqueousPro™ requires 4 to 24-hours contact time through your pipework to effectively destroy bacteria and biofilm build-up. Don’t drink water during this time period.

24-HOURS AFTER SERVICE

During the 24-hour contact period, AqueousPro™ activation occurs, which destroys bacteria and will decontaminate biofilm built up within the water pipework of your property. To confirm AqueousPro™ has effectively sanitised your water supply network, you can test using the following procedure:

STEP 4: POST TREATMENT TESTING

Run water from the furthest outlet/tap from the water tank and retest using the instructions as per step 2. above. The ideal test result will show a concentration of 5-15 ppm concentration of AqueousPro™.

High biofilm/bacteria build up: In the case of serious biofilm growth contained within the pipework, you may expect some detached biofilm to pass through the water outlets until the pipes are clear. Generally, this will clear your tap aerator(s)/nozzles and/or shower head(s) as needed.

Low test results: If the test strips reads less than 5 ppm after 24-hours, please contact your local PWS Water Technician for further advice.

Storage conditions of test strips: Avoid touching test pad or exposing the test strips to sunlight and moisture. Store opened containers in a cool (but not refrigerated), dark, dry place. Remove only as many strips as are required and seal bag immediately. Use or dispose correctly. Test strips can be disposed as normal trash waste.

Water Supply Management Plan: Ensure that your Rainwater System Management Plan is updated and includes this service/treatment in accordance with local, state and national requirements.

High biofilm/bacteria build up: In the case of serious biofilm growth contained within the pipework, you may expect some detached biofilm to pass through the water outlets until the pipes are clear. Generally, this will clear your tap aerator(s)/nozzles and/or shower head(s) as needed.

Low test results: If the test strips reads less than 5 ppm after 24-hours, please contact your local PWS Water Technician for further advice.

Storage conditions of test strips: Avoid touching test pad or exposing the test strips to sunlight and moisture. Store opened containers in a cool (but not refrigerated), dark, dry place. Remove only as many strips as are required and seal bag immediately. Use or dispose correctly. Test strips can be disposed as normal trash waste.

Water Supply Management Plan: Ensure that your Rainwater System Management Plan is updated and includes this service/treatment in accordance with local, state and national requirements.

AqueousPro™ test strip colour chart

Post Rainwater Tank Treatment Information

Now that your rainwater tanks have been cleaned and sanitised, our food grade water sanitiser AqueousPro™ needs to work its magic and kill bacteria and viruses not only in your tanks, but through the pipework into your house.

While AqueousPro™ has immediately started working in your tanks, it takes time to work its way through your pipework and to the taps inside your property. For this reason, we recommend checking the effectiveness of the product with the AqueousPro™ Test Strips provided by your Pristine Water Systems Water Technician.

AqueousPro™ may dislodge any build-up of biofilm that has accumulated in your pipework over time. It won’t take long to pass through your taps, but it is something you should be aware of. Again, if you have any issues or queries, just contact your local Pristine Water Technician, and they will only be too happy to help explain.

Please follow these instructions to ensure your water supply is properly sanitised and Pristine! Click on each step for details.

Fresh_water_in_glass

CHECK YOUR WATER CATCHMENTS

Ensure water catchment and storage is regularly inspected. Eg; Check that all vents and overflows are screened. Roofs, gutters, and other catchment areas should be clean and free from debris such as leaves, flowers, dirt, and any other contaminants.

LET PRISTINE DO THE DIRTY WORK

Water tanks should be regularly inspected and cleaned. Depending on the surrounding environment the water tank may require an annual service.

USE AQUEOUSPRO™

Regularly sanitising your water tank, pump, and pipework through to the taps with AqueousPro™ ensures any biofilm build-up is effectively removed.

ENQUIRE NOW

PROTECT UV™ FOR THE WHOLE HOUSE

Filtering and then disinfecting using an Ultraviolet system before the water enters the house, effectively kills 99.99% of harmful bacteria and viruses such as eColi, Cryptosporidium

LEARN MORE